Tuesday, August 30, 2011

Rack Options



Here's a couple shots from the lot of Larry Geweke Ford in Yuba City, CA so we can show off the difference between the tapered-leg rack and the straight-leg rack. In this case, these are forklift loadable racks mounted on single rear wheel 9' Harbor Service Bodies with standard Stainless Steel Open Top Lids.

Some people need the widest space possible to carry more material, or larger items and for them, the straight-leg rack is the way to go. The only issue is you need to pay attention getting in and out of the cab for tall people. This rack makes an excellent use of the width of the body to give maximum size capacity.

The tapered-leg rack is mounted in the same place on the body, but tapers in to give it a sleeker appearance and the rack section does not hang over the door on the cab, so it may be easier to get in and out. Many also think it looks cleaner and flows more with the lines of the truck.

The good news is everyone has a choice. There is no difference is cost, just design. Let Harbor help you get the exact body and rack combination you need for your business. Call Harbor at 800-433-9452, and visit our website at http://www.htbi.net/.

Monday, August 29, 2011

Super Sharp Vortex Doors Harbor Service Body


Some like them plain and some like them to Bling! Here we captured a truck in final stages being built for Vortex Doors by Harbor Truck Bodies in Brea, CA. They have been buying trucks just like this for a lot of years and their trucks stand out of the crowd, for sure.

First off, they are low pro bodies, so the top of the service body lids is at about the bottom of the rear window, in this case it is 34" high. This is a hard working truck that has a rear (most seem to be in the front) compartment for short welder bottles and the compartment is vented and set up for this task (See it in action on the Vortex website at www.vortexdoors.com). The rack has RackStraps on both sides. Then, a stainless steel vise bracket to the back of the right compartment.

Now we come to the bling! Polished aluminum treadplate is attached to the standard stainless steel lids, and the cargo compartment and backwrappers are covered in the same shiny treadplate. Add to this an unusual, but gorgeous chrome rear bumper and you have one sweet looking truck. Of course, we cannot forget the silver metallic base coat, clear coat paint job! It's a knockout! I'm sure their strategy was more protection from scratched paint and rust, but the bling has other obvious benefits! See more beautiful hard working Harbor bodies at our website at www.htbi.net, or give us a call at 800-433-9452.

Friday, August 26, 2011

Yellow Dodge Dump Is A Beauty!


Yellow. There's nothing quite like it to draw attention. That is the point of a display, right? If it doesn't draw attention, what good is it? Might as well park it out back with those other big white things. Not this one! This one goes front and center. Love this truck. . .

Tuesday, August 23, 2011

Low Pro Red Dually Service Body

I ran across this shot and just had to add it to the blog. I think it is a 2000 Ford 56" CA box delete chassis with a Harbor 9' Low Pro Service Body. This unit has a 2-pc cargo bed enclosure, master lock system, tapered material rack (used to be 1"x2" tubing like this, but now most are 2"x2" or 2"x3"), aluminum treadbrite lid covers, stainless steel vise bracket, and more. The chassis is an XLT uplevel trim with nice Alcoa aluminum wheels from the factory.

It is so rare to see low pro service bodies in dealer inventory and especially a dually low pro, but I gotta say that this truck is awesome! I think it works extremely well. It is also very nice to be something other than white. Here's to more low pro bodies!

Sunday, August 21, 2011

Custom Welder/Crane Body






Welder Bodies come in so many different modifications, that almost any body could be a "Welder Body." Here's yet another way. This one is an 11' Harbor Service Body with 56" high compartments. It is mounted on a 108" CA chassis so that allows 2' of space in front of the body for the Miller Trailblazer welding machine. As you can see, this welder is mounted on a sliding tray which extends all the way out from the body and supports the weight nicely.

Mounted on the top right is a Venturo ET25KX crane with crane rest and outrigger package mounted as shown in the last photo. Just think of all the stuff we can put in this wonderful set of closets. In addition, this unit has the cargo bed enclosure which keeps the things in the center compartment out of the weather, and more importantly, out of sight.

All in all, this is an awesome selection of features and benefits that could serve you well. Call Harbor at 1-800-433-9452 and visit our website at www.htbi.net.

Thursday, August 18, 2011

Harbor Flatbed with 36" Steel Gates and Rack


Here's some photos of a nice flatbed with steel fold-down sides and swing-away rear gate system. This one was specially built for Mark Christopher Chevrolet. It also has a non-forklift loadable rack. Notice the center post when the two sides are folded down. That post is easily removed just by lifting it out, so this unit can easily be loaded from the side manually or with a forklift.

Did I mention it was also a nice looking unit? Looks like a great stock piece to me. Call Kimberly or inside sales at 800-433-9452 and visit our website at www.htbi.net.

Tuesday, August 16, 2011

Roof Rack and Ladder For WorkMaster

Here's a picture of a plumber style body on a single rear wheel cutaway chassis. This one is the standard tall height with 74" inside height so you can stand up straight and stop bumping your head in there. The service body cabinets must not be enough, nor the cavernous interior, so they wanted a rack on top and the only way to deal with that is with the tried and true ladder--this one permanently attached. Now,  they can get the job done and make use of all that space on top of the body.

This truck was manufactured by Harbor Truck Bodies of Brea, CA and the end user is Tri-Tech Restoration in Burbank. Thanks to Kimberly at Harbor for the nice photo.

Sunday, August 14, 2011

Dodge Harbor Hauler Body Is A Looker!




This is the way to haul your trailer and gooseneck: The Harbor Hauler Body. Whenever people are pulling trailers, they always seem to need stuff and then they need someplace to put the stuff and here is the solution. There is plenty of room for stuff in this body and it is specifically designed to make trailering with 5th wheel or gooseneck very easy and efficient.

Give us a call at 800-433-9452 and let us build one for you in your color on your favorite truck. See our website at http://www.htbi.net/.

Thursday, August 11, 2011

Cynthia Scegiel Shows Off The SR 5T Sto-Away Power Cranes Bumper Crane


Cynthia Scegiel, President of Sto-Away Power Cranes shows us the simple set-up and operation of the SR 5T Sto-Away Bumper Crane. To see more about this company and products, go to http://www.stoaway.com/.

Recorded on March 10, 2011 at the NTEA 2011 Work Truck Show in Indianappolis, Indiana by Ryan Stone of Commercial Truck Success.

Tuesday, August 9, 2011

Tommy Gate - Cantilever Series


Tommy Gate Company's all-new Cantilever Series, specifically designed for panel vans. For more information, visit http://www.tommygate.com/

Sunday, August 7, 2011

New Arrival: 2011 Ford F350 Super Cab 4x4 w/Harbor Service Body


We're showing off a fresh arrival to Larry Geweke Ford's commercial truck inventory. This is a rare 2011 Ford F350 Super Cab Gas 4x4 Chassis with a 9' Harbor Service Body with standard stainless steel lids, HD forklift loadable rack, and power locking system.

Call Paul Brown, Commercial/Fleet Manager at Larry Geweke Ford at 530-682-7693. Also see their website at http://www.geweketrucks.com./

(This unit is stock #32717, vin# BEC82529 and is subject to prior sale.)

Friday, August 5, 2011

Low Pro On Super Cab with Tommy Gate Plus Toys








Here is a few shots of a job that Harbor Truck Bodies just finished for the Monte Vista Water District in Montclair, CA. It is a bit unique in that it is a low profile service body (34") with standard Stainless Steel open top lids and it has a Tommygate liftgate. In addition to this combination, there are a number of additions that are quite useful and effective. There is a light strip at the top of the cab for working in harm's way, a receiver hitch, a non-forklift loadable rack with a strobe light and two outdoor lamps for night work. The rack also has a compartment made of partially expanded metal. Notice also the HD tie downs in the floor of the bed area and unique tie down anchors on the top of the body. All that beauty is mounted on the new Ford Super Cab single rear wheel chassis.

We love this whole combination of features and especially the low profile service body which not only looks nice and clean, but has so much more visibility. Let Kimberly build one for you. Call her at 800-433-9452 and visit Harbor's website at http://www.htbi.net/.

Tuesday, August 2, 2011

More Space With Transverse Compartment and DRAWER!



Here is a shot of a transverse compartment with a slide out drawer. This type of compartment is so useful in many ways for many different businesses.

The shot that isn't here is a photo from the rear looking at the bed area. If it were here, you would see that since the front compartment goes all the way through the body, you lose exactly the width of the compartment in bed area, but that is a very easy trade-off in my thinking. It keeps things from getting too far forward as well so you can reach them. What would also be interesting would be a cargo bed enclosure and then you can hide the things in the back.

This particular transverse compartment goes from one side through the body to the backside of the compartment on the opposite side of the body, so the drawer only slides out one way. This makes for a nice long drawer and you still have the original functional compartment on the other side. It is available all the way through the body and have the drawer go out either side at any time and that would be pretty useful too. In this case, the long drawer comes out on the safer curbside of the truck rather than the streetside. It is probably the best scenario for that reason.

This is an 8' unit on an uplevel GM chassis and also has two different design ladder racks installed. These shots were courtesy of Greg Hoffner of Refrigeration Services Unlimited of Anaheim, CA who does Commercial and Industrial Refrigeration and Air Conditioning as well as Ice Makers. They are in Southern California and their phone number is 714-281-7359.

Let Harbor Truck build one for you! Call Kimberly or Tony at 800-433-9452.